Summary
Highlights
The video introduces a method to build super easy saw horses for various homestead projects. The presenter explains that his current saw horses are being used for drying potatoes, necessitating the construction of new ones. These saw horses are inexpensive, requiring only five 2x4s for a pair (or 2.5 2x4s per saw horse), are effective, and have easily replaceable parts.
The design uses basic tools such as a chop saw (or hand saw/circular saw), a cordless drill, and screws. A key advantage of this design is that there are no angle cuts; all cuts are straight, simplifying the construction process. Each saw horse requires five pieces cut at 30 inches and two pieces cut at 32 inches for the top. For building two saw horses, you'll need ten 30-inch pieces and four 32-inch pieces.
To start assembly, take two 32-inch pieces and one 30-inch piece. Mark the halfway point and one inch down from the end of each 32-inch piece. On the 30-inch piece, mark the center. Align the center mark of the 30-inch piece with the mark on the 32-inch piece, clamp them together, and then screw them securely. This forms the I-beam structure. Accuracy in these steps is important for stability later on, though 'Homestead exact' is sufficient.
Once the I-beam is assembled, it's time to add the legs. Lay the I-beam on its side and grab one of the remaining 30-inch pieces for a leg. Position the leg flush with the end of the saw horse and secure it with three screws. Repeat this process for all four legs on both sides of the I-beam.
After all the legs are attached, the saw horse will be sturdy. The presenter then shows two completed saw horses, highlighting their stackable design. He mentions that it took about 30 minutes to make the set, reinforcing the ease and speed of the build. He plans to make more sets for use around the homestead due to their utility. The video concludes with a call to action for viewers to subscribe and engage with the channel.