KONFIGURASI WLAN (ACCESS POINT) PADA ROUTER MIKROTIK RB951Ui-2HnD)

Introduction and Setup00:00:00

The presenter introduces the video topic: configuring WLAN or an access point on a MikroTik router, specifically the RB 951 Ui 2hnd model. He explains the hardware setup where Ether 1 connects to the internet and Ether 2 connects to a laptop for configuration via the Winbox application.

Connecting to the Router00:02:00

The presenter connects to the router via Winbox using the MAC address with an empty password. He renames the interfaces, setting Ether 1 as 'internet' and Ether 2 as 'PC', and enables the wireless interface which was previously disabled.

IP Address Configuration00:02:55

IP addresses are assigned to the interfaces. Ether 2 is set to 192.168.111.1/24 for local management, while Ether 1 is configured as a DHCP client to automatically obtain an IP address from the upstream network. The presenter verifies internet connectivity by pinging google.com.

Wireless Access Point Configuration00:05:47

The wireless interface is configured in AP Bridge mode with a 2 GHz frequency and an SSID named 'ap mikrotik'. A security profile is created with WPA2-PSK authentication and the password '1345678', which is then applied to the wireless settings.

DHCP Server and NAT Setup00:07:49

A DHCP server is configured using the setup wizard to provide IP addresses ranging from 192.168.112.200 to 192.168.112.254 to wireless clients. Finally, a NAT masquerade rule is added for the 'internet' out-interface to allow connected devices to access the web.

Testing and Conclusion00:09:27

The presenter tests the configuration by connecting a laptop to the 'ap mikrotik' WiFi network using the created password. He successfully browses detik.com and confirms the laptop received an IP address (192.168.112.254) automatically from the MikroTik DHCP server before concluding the tutorial.